このページに記載の方法で環境は作成可能。Makeで動く環境なのが地味にありがたい。
2020/1/18時点ではu-bootのCONFIG_SYS_TEXT_BASEをCONFIG_SUBSYSTEM_PRELOADED_BL33_BASEと同じ0x10080000に設定し直す必要がある。petalinuxフォルダでpetalinux -c u-bootで/SYS_TEXTを探して0x8000000を0x10080000とすればOK。fix_u96v2_pwrseq_simple.patchが足りないと怒られたのでproject-spec/meta-user/recipes-kernel/linux-xlnx/に置いておいた。
また、project-spec/meta-user/recipes-kernel/linux-xlnx_%.bbappendからSRC_URI += "file://user.cfg"をコメントアウトしないとうまく動作しないよう。理由は不明。
あとはpetalinux-buildとpetalinux-build --sdk, petalinux-package --sysroot -d {SYSROOT}を実行してsysrootを得る。
Emulation-SWのLaunch on EmulatorはどうもLaunch_Emulator.tclを アプリケーションフォルダ配下のEmulation-SWで実行しているみたい。
<Platform_PATH>/wksp1/vecadd/Emulation-SW
オプションはIDEからは
-device-family ultrascale -pid-file emulation.pid -t sw_emu -no-reboot -forward-port 1440 1534 -runtime ocl
なので、フォルダに移動してコマンド実行すれば良さそう。
SDブートの場合は自分でSDイメージ作成して-sd-card-imageオプションでパスを指定すれば大丈夫そう。
=>IDEで動作させるためにLaunch_Emulator.tclを変更させる。いかなるオプションでもQEMUの起動パラメータとしてSDイメージ指定をしないようにし、qemu_args.txtで必要データ含んだドライブを指定する。SD0はLinux動作時に認識しないので苦肉の策としてSD0とSD1に同じsdイメージを指定することで回避する。
用意するSDイメージはvecadd/Emulation-SW/_vimage/emulation/sd_cardにデータを集めてまとめてイメージ化しているので、これと同じ手順でデータ生成すれば大丈夫だろう。
保存しているのは
- bootフォルダのデータ
- vecadd/Emulation-SW/binary_container_1.xclbin
- platform/boot/generic.readme
- <Platform_PATH>/wksp1/vecadd/Emulation-SW/_vimage/emulation/init.sh
- <VITIS_PATH>/data/emulation/unified => sd_card/data/emulation/unified
p1:
上記データ
p2：
SYSROOTフォルダ
上記状態で動かしてもVitisからEmulation-SWを実行するとTCF Agentを待ち続けてしまうのでやはりGEMのリンクは必要そうなので追加して試す。
2020/1/20追記
単純にGEM3をVivadoでイネーブルにしても動作しなかった。問題はhw-dtbで指定しているzynqmp-qemu-multiarch-arm.dtbがzcu100ベースとなっており、PHYが存在しない環境がQEMUで構築されていたことであった。とりあえずzcu102に揃える形でgem3のmdioに対して未使用のphandle値を当てて、mdioも宣言し、compatibleに"cdns,gem"を指定したdtsをdtcでdtbに生成しなおしたものを動かすようにしたら問題は解消した。
ただ、petalinux的にはどうやって設定するのが正解かは未調査。
確証は持てないけど動かすだけならzcu102ベースのzynqmp-qemu-multiarch-arm.dtbを持ってきても大丈夫と思う。
ここまでくればEmulation-SWも行けるはず。
=>2020/1/21動作確認。
とりあえずpetlainux-boot --qemuの起動ログ
$ petalinux-boot --qemu --u-boot --qemu-args "-drive file=myfile/sd.img,if=sd,id=sd0,index=0,format=raw -drive file=myfile/sd.img,if=sd,id=sd1,index=1,format=raw"
INFO: sourcing build tools
INFO: Starting microblaze QEMU
INFO: Starting the above QEMU command in the background
INFO: qemu-system-microblazeel -M microblaze-fdt -serial mon:stdio -serial /dev/null -display none -kernel ultra96v2_oob/petalinux/pre-built/linux/images/pmu_rom_qemu_sha3.elf -device loader,file=ultra96v2_oob/petalinux/images/linux/pmufw.elf -hw-dtb ultra96v2_oob/petalinux/images/linux/zynqmp-qemu-multiarch-pmu.dtb -machine-path /tmp/tmp.4F0B7WFsvD -device loader,addr=0xfd1a0074,data=0x1011003,data-len=4 -device loader,addr=0xfd1a007C,data=0x1010f03,data-len=4
qemu-system-microblazeel: Failed to connect socket /tmp/tmp.4F0B7WFsvD/qemu-rport-_pmu@0: No such file or directory
qemu-system-microblazeel: info: QEMU waiting for connection on: disconnected:unix:/tmp/tmp.4F0B7WFsvD/qemu-rport-_pmu@0,server
INFO: Set QEMU tftp to ultra96v2_oob/petalinux/images/linux
INFO: TCP PORT is free
INFO: Starting aarch64 QEMU
INFO: qemu-system-aarch64 -M arm-generic-fdt -serial /dev/null -serial mon:stdio -serial /dev/null -serial /dev/null -display none -device loader,file=ultra96v2_oob/petalinux/images/linux/bl31.elf,cpu-num=0 -device loader,file=ultra96v2_oob/petalinux/images/linux/u-boot.elf -gdb tcp::9000 -dtb ultra96v2_oob/petalinux/images/linux/system.dtb -net nic -net nic -net nic -net nic,netdev=eth0 -netdev user,id=eth0,tftp=ultra96v2_oob/petalinux/images/linux -hw-dtb ultra96v2_oob/petalinux/images/linux/zynqmp-qemu-multiarch-arm.dtb -machine-path /tmp/tmp.4F0B7WFsvD -global xlnx,zynqmp-boot.cpu-num=0 -global xlnx,zynqmp-boot.use-pmufw=true -drive file=myfile/sd.img,if=sd,id=sd0,index=0,format=raw -drive file=myfile/sd.img,if=sd,id=sd1,index=1,format=raw -m 4G
QEMU 2.11.1 monitor - type 'help' for more information
(qemu) audio: Could not init `oss' audio driver
qemu-system-aarch64: warning: vlan 0 is not connected to host network
PMU Firmware 2019.2 Jan 20 2020 11:13:58
PMU_ROM Version: xpbr-v8.1.0-0
NOTICE: ATF running on XCZUUNKN/QEMU v4/RTL0.0 at 0xfffea000
NOTICE: BL31: Secure code at 0x60000000
NOTICE: BL31: Non secure code at 0x10080000
NOTICE: BL31: v2.0(release):xilinx-v2019.1-12-g713dace9
NOTICE: BL31: Built : 10:58:47, Jan 20 2020
PMUFW: v1.1
U-Boot 2019.01 (Jan 20 2020 - 11:21:44 +0000)
Model: Avnet Ultra96 Rev1
Board: Xilinx ZynqMP
DRAM: 2 GiB
EL Level: EL2
Chip ID: unknown
MMC: mmc@ff160000: 0, mmc@ff170000: 1
Loading Environment from FAT... *** Warning - bad CRC, using default environment
In: serial@ff010000
Out: serial@ff010000
Err: serial@ff010000
Model: Avnet Ultra96 Rev1
Board: Xilinx ZynqMP
Bootmode: JTAG_MODE
Reset reason:
Net: ZYNQ GEM: ff0e0000, phyaddr ffffffff, interface gmii
eth0: ethernet@ff0e0000
U-BOOT for ultra96v2-oob-2019_2
BOOTP broadcast 1
DHCP client bound to address 10.0.2.15 (2 ms)
Hit any key to stop autoboot: 0
Device: mmc@ff160000
Manufacturer ID: aa
OEM: 5859
Name: QEMU!
Bus Speed: 17361111
Mode : SD Legacy
Rd Block Len: 512
SD version 2.0
High Capacity: Yes
Capacity: 19.5 GiB
Bus Width: 4-bit
Erase Group Size: 512 Bytes
18479944 bytes read in 2672 ms (6.6 MiB/s)
## Loading kernel from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'kernel@1' kernel subimage
Description: Linux kernel
Type: Kernel Image
Compression: uncompressed
Data Start: 0x10000108
Data Size: 18424320 Bytes = 17.6 MiB
Architecture: AArch64
OS: Linux
Load Address: 0x00080000
Entry Point: 0x00080000
Hash algo: sha1
Hash value: e38e956d66b739899c5385223172ae6b647eeffa
Verifying Hash Integrity ... sha1+ OK
## Loading fdt from FIT Image at 10000000 ...
Using 'conf@system-top.dtb' configuration
Trying 'fdt@system-top.dtb' fdt subimage
Description: Flattened Device Tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x1119240c
Data Size: 53701 Bytes = 52.4 KiB
Architecture: AArch64
Hash algo: sha1
Hash value: 872c49f826ce2a62b8241f52877c5b0c9cb06e00
Verifying Hash Integrity ... sha1+ OK
Booting using the fdt blob at 0x1119240c
Loading Kernel Image ... OK
Loading Device Tree to 0000000007fef000, end 0000000007fff1c4 ... OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[ 0.000000] Linux version 4.19.0-xilinx-v2019.2 (oe-user@oe-host) (gcc version 8.2.0 (GCC)) #1 SMP Mon Jan 20 09:32:29 UTC 2020
[ 0.000000] Machine model: Avnet Ultra96 Rev1
[ 0.000000] earlycon: cdns0 at MMIO 0x00000000ff010000 (options '115200n8')
[ 0.000000] bootconsole [cdns0] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Failed to reserve 1024 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x3f8 with crng_init=0
[ 0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s52568 r8192 d29352 u90112
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 843419
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 512771
[ 0.000000] Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Memory: 2027488K/2079744K available (10940K kernel code, 648K rwdata, 5504K rodata, 832K init, 514K bss, 52256K reserved, 0K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f902f000
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] irq-xilinx: mismatch in kind-of-intr param
[ 0.000000] irq-xilinx: /amba_pl@0/interrupt-controller@80020000: num_irq=32, edge=0xffffffff
[ 0.000000] arch_timer: cp15 timer(s) running at 65.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xefdb196da, max_idle_ns: 440795204367 ns
[ 0.000160] sched_clock: 56 bits at 65MHz, resolution 15ns, wraps every 2199023255550ns
[ 0.012522] Console: colour dummy device 80x25
[ 0.014510] Calibrating delay loop (skipped), value calculated using timer frequency.. 130.00 BogoMIPS (lpj=260000)
[ 0.016017] pid_max: default: 32768 minimum: 301
[ 0.019764] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.020658] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.060145] ASID allocator initialised with 32768 entries
[ 0.061385] rcu: Hierarchical SRCU implementation.
[ 0.066015] EFI services will not be available.
[ 0.069869] smp: Bringing up secondary CPUs ...
[ 0.090527] Detected VIPT I-cache on CPU1
[ 0.092424] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[ 0.118918] Detected VIPT I-cache on CPU2
[ 0.119615] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[ 0.137869] Detected VIPT I-cache on CPU3
[ 0.138645] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[ 0.139476] smp: Brought up 1 node, 4 CPUs
[ 0.142027] SMP: Total of 4 processors activated.
[ 0.142381] CPU features: detected: 32-bit EL0 Support
[ 0.144805] CPU: All CPU(s) started at EL2
[ 0.145635] alternatives: patching kernel code
[ 0.176375] devtmpfs: initialized
[ 0.248171] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.249103] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.258864] xor: measuring software checksum speed
[ 0.305128] 8regs : 966.000 MB/sec
[ 0.348877] 8regs_prefetch: 958.000 MB/sec
[ 0.390437] 32regs : 1780.000 MB/sec
[ 0.435454] 32regs_prefetch: 1091.000 MB/sec
[ 0.436351] xor: using function: 32regs (1780.000 MB/sec)
[ 0.438793] pinctrl core: initialized pinctrl subsystem
[ 0.479206] NET: Registered protocol family 16
[ 0.485836] audit: initializing netlink subsys (disabled)
[ 0.495064] audit: type=2000 audit(0.412:1): state=initialized audit_enabled=0 res=1
[ 0.516784] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[ 0.518968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.524196] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.743423] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.826257] raid6: int64x1 gen() 469 MB/s
[ 0.898181] raid6: int64x1 xor() 292 MB/s
[ 0.971025] raid6: int64x2 gen() 642 MB/s
[ 1.042454] raid6: int64x2 xor() 114 MB/s
[ 1.119571] raid6: int64x4 gen() 723 MB/s
[ 1.193526] raid6: int64x4 xor() 204 MB/s
[ 1.269566] raid6: int64x8 gen() 590 MB/s
[ 1.342334] raid6: int64x8 xor() 343 MB/s
[ 1.413133] raid6: neonx1 gen() 116 MB/s
[ 1.485865] raid6: neonx1 xor() 188 MB/s
[ 1.563355] raid6: neonx2 gen() 422 MB/s
[ 1.635816] raid6: neonx2 xor() 206 MB/s
[ 1.708376] raid6: neonx4 gen() 374 MB/s
[ 1.779532] raid6: neonx4 xor() 186 MB/s
[ 1.853871] raid6: neonx8 gen() 389 MB/s
[ 1.928653] raid6: neonx8 xor() 189 MB/s
[ 1.929205] raid6: using algorithm int64x4 gen() 723 MB/s
[ 1.930098] raid6: .... xor() 204 MB/s, rmw enabled
[ 1.933420] raid6: using neon recovery algorithm
[ 1.951234] GPIO IRQ not connected
[ 1.951618] XGpio: gpio@80040000: registered, base is 510
[ 1.952273] GPIO IRQ not connected
[ 1.956832] XGpio: gpio@80040000: dual channel registered, base is 508
[ 1.964512] GPIO IRQ not connected
[ 1.965506] XGpio: gpio@80050000: registered, base is 507
[ 1.970925] GPIO IRQ not connected
[ 1.971526] XGpio: gpio@80060000: registered, base is 506
[ 1.973478] GPIO IRQ not connected
[ 1.978371] XGpio: gpio@80060000: dual channel registered, base is 505
[ 1.997461] SCSI subsystem initialized
[ 2.004613] usbcore: registered new interface driver usbfs
[ 2.005689] usbcore: registered new interface driver hub
[ 2.006830] usbcore: registered new device driver usb
[ 2.008732] media: Linux media interface: v0.10
[ 2.009452] videodev: Linux video capture interface: v2.00
[ 2.010186] pps_core: LinuxPPS API ver. 1 registered
[ 2.010614] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[ 2.011462] PTP clock support registered
[ 2.012380] EDAC MC: Ver: 3.0.0
[ 2.043657] zynqmp-ipi-mbox mailbox@ff990400: Probed ZynqMP IPI Mailbox driver.
[ 2.049020] zynqmp-ipi-mbox mailbox@ff90000: Probed ZynqMP IPI Mailbox driver.
[ 2.051587] FPGA manager framework
[ 2.056578] Advanced Linux Sound Architecture Driver Initialized.
[ 2.076398] Bluetooth: Core ver 2.22
[ 2.077867] NET: Registered protocol family 31
[ 2.079104] Bluetooth: HCI device and connection manager initialized
[ 2.080118] Bluetooth: HCI socket layer initialized
[ 2.080719] Bluetooth: L2CAP socket layer initialized
[ 2.082179] Bluetooth: SCO socket layer initialized
[ 2.098302] clocksource: Switched to clocksource arch_sys_counter
[ 2.102887] VFS: Disk quotas dquot_6.6.0
[ 2.103494] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.218820] NET: Registered protocol family 2
[ 2.238589] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[ 2.239343] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 2.240297] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 2.241852] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.253231] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 2.254789] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 2.259226] NET: Registered protocol family 1
[ 2.273234] RPC: Registered named UNIX socket transport module.
[ 2.273785] RPC: Registered udp transport module.
[ 2.275159] RPC: Registered tcp transport module.
[ 2.275625] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.299630] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ 2.309761] hw perfevents: enabled with armv8_pmuv3 PMU driver, 1 counters available
[ 2.328005] Initialise system trusted keyrings
[ 2.331848] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 2.356452] NFS: Registering the id_resolver key type
[ 2.358874] Key type id_resolver registered
[ 2.359253] Key type id_legacy registered
[ 2.359848] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 2.360897] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 4.512499] NET: Registered protocol family 38
[ 4.720662] Key type asymmetric registered
[ 4.721582] Asymmetric key parser 'x509' registered
[ 4.722828] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 4.723896] io scheduler noop registered
[ 4.724351] io scheduler deadline registered
[ 4.724957] io scheduler cfq registered (default)
[ 4.725360] io scheduler mq-deadline registered
[ 4.725688] io scheduler kyber registered
[ 5.230445] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 5.274800] 80010000.serial: ttyS3 at MMIO 0x80011000 (irq = 83, base_baud = 4687500) is a 16550A
[ 5.285577] 80030000.serial: ttyS1 at MMIO 0x80031000 (irq = 84, base_baud = 4687500) is a 16550A
[ 5.446398] brd: module loaded
[ 5.511289] loop: module loaded
[ 5.528049] mtdoops: mtd device (mtddev=name/number) must be supplied
[ 5.554819] libphy: Fixed MDIO Bus: probed
[ 5.576585] tun: Universal TUN/TAP device driver, 1.6
[ 5.587569] CAN device driver interface
[ 5.604589] usbcore: registered new interface driver asix
[ 5.608543] usbcore: registered new interface driver ax88179_178a
[ 5.609977] usbcore: registered new interface driver cdc_ether
[ 5.612734] usbcore: registered new interface driver net1080
[ 5.613611] usbcore: registered new interface driver cdc_subset
[ 5.614978] usbcore: registered new interface driver zaurus
[ 5.615918] usbcore: registered new interface driver cdc_ncm
[ 5.626498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.627103] ehci-pci: EHCI PCI platform driver
[ 5.636288] usbcore: registered new interface driver uas
[ 5.638220] usbcore: registered new interface driver usb-storage
[ 5.647258] gadgetfs: USB Gadget filesystem, version 24 Aug 2004
[ 5.666398] rtc_zynqmp ffa60000.rtc: rtc core: registered ffa60000.rtc as rtc0
[ 5.668411] i2c /dev entries driver
[ 5.712266] usbcore: registered new interface driver uvcvideo
[ 5.712817] USB Video Class driver (1.1.1)
[ 5.730988] Bluetooth: HCI UART driver ver 2.3
[ 5.731573] Bluetooth: HCI UART protocol H4 registered
[ 5.732121] Bluetooth: HCI UART protocol BCSP registered
[ 5.733052] Bluetooth: HCI UART protocol LL registered
[ 5.733466] Bluetooth: HCI UART protocol ATH3K registered
[ 5.735794] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.737357] Bluetooth: HCI UART protocol Intel registered
[ 5.738894] Bluetooth: HCI UART protocol QCA registered
[ 5.740315] usbcore: registered new interface driver bcm203x
[ 5.741308] usbcore: registered new interface driver bpa10x
[ 5.742658] usbcore: registered new interface driver bfusb
[ 5.743494] usbcore: registered new interface driver btusb
[ 5.745436] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 5.746868] usbcore: registered new interface driver ath3k
[ 5.749608] EDAC MC: ECC not enabled
[ 5.757597] EDAC DEVICE0: Giving out device to module edac controller cache_err: DEV edac (POLLED)
[ 5.762859] EDAC ZynqMP-OCM: ECC not enabled - Disabling EDAC driver
[ 5.765185] pwrseq_simple sdio_pwrseq: mmc failed to get default resetn GPIO
[ 5.766244] pwrseq_simple sdio_pwrseq: mmc failed to get default chip_en GPIO
[ 5.771930] sdhci: Secure Digital Host Controller Interface driver
[ 5.773029] sdhci: Copyright(c) Pierre Ossman
[ 5.773500] sdhci-pltfm: SDHCI platform and OF driver helper
[ 5.783943] ledtrig-cpu: registered to indicate activity on CPUs
[ 5.787615] zynqmp_firmware_probe Platform Management API v1.1
[ 5.788581] zynqmp_firmware_probe Trustzone version v1.0
[ 5.881087] zynqmp-pinctrl firmware:zynqmp-firmware:pinctrl: zynqmp pinctrl initialized
[ 6.452641] zynqmp_clk_mux_get_parent() getparent failed for clock: lpd_wdt, ret = -22
[ 6.460304] alg: No test for xilinx-zynqmp-aes (zynqmp-aes)
[ 6.461005] zynqmp_aes zynqmp_aes: AES Successfully Registered
[ 6.461005]
[ 6.464803] alg: No test for xilinx-keccak-384 (zynqmp-keccak-384)
[ 6.472280] alg: No test for xilinx-zynqmp-rsa (zynqmp-rsa)
[ 6.478601] usbcore: registered new interface driver usbhid
[ 6.478940] usbhid: USB HID core driver
[ 6.486901] xlnk xlnk: Major 242
[ 6.489828] xlnk xlnk: xlnk driver loaded
[ 6.490707] xlnk xlnk: xlnk_pdev is not null
[ 6.548653] fpga_manager fpga0: Xilinx ZynqMP FPGA Manager registered
[ 6.558746] usbcore: registered new interface driver snd-usb-audio
[ 6.579902] pktgen: Packet Generator for packet performance testing. Version: 2.75
[ 6.599962] Initializing XFRM netlink socket
[ 6.603168] NET: Registered protocol family 10
[ 6.623147] Segment Routing with IPv6
[ 6.625614] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 6.636225] NET: Registered protocol family 17
[ 6.637091] NET: Registered protocol family 15
[ 6.639957] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 6.645944] can: controller area network core (rev 20170425 abi 9)
[ 6.648041] NET: Registered protocol family 29
[ 6.649184] can: raw protocol (rev 20170425)
[ 6.649683] can: broadcast manager protocol (rev 20170425 t)
[ 6.650777] can: netlink gateway (rev 20170425) max_hops=1
[ 6.652841] Bluetooth: RFCOMM TTY layer initialized
[ 6.658801] Bluetooth: RFCOMM socket layer initialized
[ 6.661217] Bluetooth: RFCOMM ver 1.11
[ 6.665110] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.665705] Bluetooth: BNEP filters: protocol multicast
[ 6.666637] Bluetooth: BNEP socket layer initialized
[ 6.667597] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 6.668292] Bluetooth: HIDP socket layer initialized
[ 6.672756] 9pnet: Installing 9P2000 support
[ 6.674492] Key type dns_resolver registered
[ 6.683302] registered taskstats version 1
[ 6.683788] Loading compiled-in X.509 certificates
[ 6.692318] Btrfs loaded, crc32c=crc32c-generic
[ 6.768022] ff000000.serial: ttyPS2 at MMIO 0xff000000 (irq = 41, base_baud = 10416666) is a xuartps
[ 6.778182] ff010000.serial: ttyPS0 at MMIO 0xff010000 (irq = 42, base_baud = 2480158) is a xuartps
[ 6.781080] console [ttyPS0] enabled
[ 6.781080] console [ttyPS0] enabled
[ 6.782085] bootconsole [cdns0] disabled
[ 6.782085] bootconsole [cdns0] disabled
[ 6.803460] of-fpga-region fpga-full: FPGA Region probed
[ 6.831924] xilinx-dpdma fd4c0000.dma: Xilinx DPDMA engine is probed
[ 6.840920] xilinx-zynqmp-dma fd500000.dma: ZynqMP DMA driver Probe success
[ 6.846506] xilinx-zynqmp-dma fd510000.dma: ZynqMP DMA driver Probe success
[ 6.851837] xilinx-zynqmp-dma fd520000.dma: ZynqMP DMA driver Probe success
[ 6.859324] xilinx-zynqmp-dma fd530000.dma: ZynqMP DMA driver Probe success
[ 6.867312] xilinx-zynqmp-dma fd540000.dma: ZynqMP DMA driver Probe success
[ 6.871566] xilinx-zynqmp-dma fd550000.dma: ZynqMP DMA driver Probe success
[ 6.874555] xilinx-zynqmp-dma fd560000.dma: ZynqMP DMA driver Probe success
[ 6.877468] xilinx-zynqmp-dma fd570000.dma: ZynqMP DMA driver Probe success
[ 6.884132] xilinx-zynqmp-dma ffa80000.dma: ZynqMP DMA driver Probe success
[ 6.892380] xilinx-zynqmp-dma ffa90000.dma: ZynqMP DMA driver Probe success
[ 6.899735] xilinx-zynqmp-dma ffaa0000.dma: ZynqMP DMA driver Probe success
[ 6.903678] xilinx-zynqmp-dma ffab0000.dma: ZynqMP DMA driver Probe success
[ 6.907128] xilinx-zynqmp-dma ffac0000.dma: ZynqMP DMA driver Probe success
[ 6.910344] xilinx-zynqmp-dma ffad0000.dma: ZynqMP DMA driver Probe success
[ 6.913815] xilinx-zynqmp-dma ffae0000.dma: ZynqMP DMA driver Probe success
[ 6.919872] xilinx-zynqmp-dma ffaf0000.dma: ZynqMP DMA driver Probe success
[ 6.943320] xilinx-psgtr fd400000.zynqmp_phy: Lane:1 type:8 protocol:4 pll_locked:yes
[ 7.015575] zynqmp_clk_divider_set_rate() set divider failed for ams_ref_div1, ret = -13
[ 7.119624] xilinx-dp-snd-codec fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0: Failed to get required clock freq
[ 7.122985] xilinx-dp-snd-codec: probe of fd4a0000.zynqmp-display:zynqmp_dp_snd_codec0 failed with error -22
[ 7.127692] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm0: Xilinx DisplayPort Sound PCM probed
[ 7.135379] xilinx-dp-snd-pcm zynqmp_dp_snd_pcm1: Xilinx DisplayPort Sound PCM probed
[ 7.144218] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
[ 7.150937] OF: graph: no port node found in /amba/zynqmp-display@fd4a0000
[ 7.161849] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.163062] [drm] No driver support for vblank timestamp query.
[ 7.172734] xlnx-drm xlnx-drm.0: bound fd4a0000.zynqmp-display (ops 0xffffff8008bef538)
[ 7.389614] Console: switching to colour frame buffer device 128x48
[ 7.421749] zynqmp-display fd4a0000.zynqmp-display: fb0: frame buffer device
[ 7.428885] [drm] Initialized xlnx 1.0.0 20130509 for fd4a0000.zynqmp-display on minor 0
[ 7.430271] zynqmp-display fd4a0000.zynqmp-display: ZynqMP DisplayPort Subsystem driver probed
[ 7.436494] zynqmp_gpd_attach_dev() domain6 request failed for node 35: -13
[ 7.437332] cdns-spi ff040000.spi: failed to add to PM domain domain6: -13
[ 7.438721] cdns-spi: probe of ff040000.spi failed with error -13
[ 7.442709] zynqmp_gpd_attach_dev() domain7 request failed for node 36: -13
[ 7.443355] cdns-spi ff050000.spi: failed to add to PM domain domain7: -13
[ 7.443901] cdns-spi: probe of ff050000.spi failed with error -13
[ 7.458474] macb ff0e0000.ethernet: Not enabling partial store and forward
[ 7.459435] macb: GEM doesn't support hardware ptp.
[ 7.473514] libphy: MACB_mii_bus: probed
[ 7.631174] Marvell 88E1118 ff0e0000.ethernet-ffffffff:07: attached PHY driver [Marvell 88E1118] (mii_bus:phy_addr=ff0e0000.ethernet-ffffffff:07, irq=POLL)
[ 7.633130] macb ff0e0000.ethernet eth0: Cadence GEM rev 0x40070106 at 0xff0e0000 irq 29 (00:0a:35:00:22:01)
[ 7.639213] xilinx-axipmon ffa00000.perf-monitor: Probed Xilinx APM
[ 7.646675] xilinx-axipmon fd0b0000.perf-monitor: Probed Xilinx APM
[ 7.650998] xilinx-axipmon fd490000.perf-monitor: Probed Xilinx APM
[ 7.655471] xilinx-axipmon ffa10000.perf-monitor: Probed Xilinx APM
[ 7.690353] dwc3 fe200000.dwc3: Failed to get clk 'ref': -2
[ 7.693191] WARNING: CPU: 3 PID: 484 at include/linux/dma-mapping.h:516 dwc3_alloc_event_buffers+0x138/0x1b8
[ 7.694431] Modules linked in:
[ 7.695455] CPU: 3 PID: 484 Comm: kworker/3:1 Not tainted 4.19.0-xilinx-v2019.2 #1
[ 7.696207] Hardware name: Avnet Ultra96 Rev1 (DT)
[ 7.698220] Workqueue: events deferred_probe_work_func
[ 7.699947] pstate: 60000005 (nZCv daif -PAN -UAO)
[ 7.704192] pc : dwc3_alloc_event_buffers+0x138/0x1b8
[ 7.706215] lr : dwc3_alloc_event_buffers+0x6c/0x1b8
[ 7.707159] sp : ffffff8009d836e0
[ 7.707716] x29: ffffff8009d836e0 x28: 0000000000000000
[ 7.708339] x27: 0000000000000000 x26: 0000000000000000
[ 7.708602] x25: ffffffc07cfe1b38 x24: 0000000000001000
[ 7.708837] x23: ffffffc07cfd4810 x22: ffffff8008b37000
[ 7.709078] x21: ffffffc07c82f018 x20: ffffff8009178648
[ 7.709314] x19: ffffffc07cfe1b18 x18: 0000000000000010
[ 7.709538] x17: 0000000000000000 x16: 0000000000000000
[ 7.709771] x15: ffffffffffffffff x14: ffffff8009178648
[ 7.712130] x13: ffffff808921af0f x12: ffffff800921af17
[ 7.713879] x11: 0000000000000001 x10: ffffff80091f8040
[ 7.714442] x9 : 0000000000000000 x8 : ffffffc07c738000
[ 7.714867] x7 : 0000000000000000 x6 : 000000000000003f
[ 7.715283] x5 : 0000000000000040 x4 : ffffffc07cfd4aa0
[ 7.715682] x3 : 0000000000000000 x2 : 0000000000000001
[ 7.716071] x1 : ffffffc07cfe1b00 x0 : 0000000000000000
[ 7.717158] Call trace:
[ 7.718017] dwc3_alloc_event_buffers+0x138/0x1b8
[ 7.719802] dwc3_probe+0x7b4/0xbb0
[ 7.720955] platform_drv_probe+0x50/0xa0
[ 7.724174] really_probe+0x1c8/0x280
[ 7.724885] driver_probe_device+0x54/0xe8
[ 7.725261] __device_attach_driver+0xb8/0xe8
[ 7.725633] bus_for_each_drv+0x78/0xc8
[ 7.726146] __device_attach+0xd4/0x130
[ 7.727025] device_initial_probe+0x10/0x18
[ 7.728044] bus_probe_device+0x90/0x98
[ 7.728699] device_add+0x334/0x608
[ 7.728990] of_device_add+0x58/0x68
[ 7.729270] of_platform_device_create_pdata+0xac/0x108
[ 7.729650] of_platform_bus_create+0x294/0x390
[ 7.730358] of_platform_populate+0x74/0xd8
[ 7.730928] dwc3_of_simple_probe+0x3fc/0x528
[ 7.731313] platform_drv_probe+0x50/0xa0
[ 7.731621] really_probe+0x1c8/0x280
[ 7.731911] driver_probe_device+0x54/0xe8
[ 7.732214] __device_attach_driver+0xb8/0xe8
[ 7.733643] bus_for_each_drv+0x78/0xc8
[ 7.734061] __device_attach+0xd4/0x130
[ 7.734322] device_initial_probe+0x10/0x18
[ 7.736981] bus_probe_device+0x90/0x98
[ 7.738007] deferred_probe_work_func+0x6c/0xa0
[ 7.740200] process_one_work+0x1e4/0x340
[ 7.740605] worker_thread+0x248/0x488
[ 7.740920] kthread+0x124/0x128
[ 7.741190] ret_from_fork+0x10/0x18
[ 7.741755] ---[ end trace c448154a8f7576be ]---
[ 7.743080] dwc3 fe200000.dwc3: swiotlb: coherent allocation failed, size=4096
[ 7.743771] CPU: 3 PID: 484 Comm: kworker/3:1 Tainted: G W 4.19.0-xilinx-v2019.2 #1
[ 7.744436] Hardware name: Avnet Ultra96 Rev1 (DT)
[ 7.744890] Workqueue: events deferred_probe_work_func
[ 7.745333] Call trace:
[ 7.745504] dump_backtrace+0x0/0x148
[ 7.745765] show_stack+0x14/0x20
[ 7.746079] dump_stack+0x90/0xb4
[ 7.746284] swiotlb_alloc+0x160/0x168
[ 7.746501] __dma_alloc+0xa8/0x1e0
[ 7.746705] dwc3_alloc_event_buffers+0xd0/0x1b8
[ 7.746966] dwc3_probe+0x7b4/0xbb0
[ 7.747166] platform_drv_probe+0x50/0xa0
[ 7.747393] really_probe+0x1c8/0x280
[ 7.747585] driver_probe_device+0x54/0xe8
[ 7.747792] __device_attach_driver+0xb8/0xe8
[ 7.748014] bus_for_each_drv+0x78/0xc8
[ 7.748212] __device_attach+0xd4/0x130
[ 7.748406] device_initial_probe+0x10/0x18
[ 7.748629] bus_probe_device+0x90/0x98
[ 7.748845] device_add+0x334/0x608
[ 7.751613] of_device_add+0x58/0x68
[ 7.753648] of_platform_device_create_pdata+0xac/0x108
[ 7.754502] of_platform_bus_create+0x294/0x390
[ 7.754911] of_platform_populate+0x74/0xd8
[ 7.755688] dwc3_of_simple_probe+0x3fc/0x528
[ 7.756541] platform_drv_probe+0x50/0xa0
[ 7.758254] really_probe+0x1c8/0x280
[ 7.758597] driver_probe_device+0x54/0xe8
[ 7.759205] __device_attach_driver+0xb8/0xe8
[ 7.759647] bus_for_each_drv+0x78/0xc8
[ 7.760072] __device_attach+0xd4/0x130
[ 7.760399] device_initial_probe+0x10/0x18
[ 7.760779] bus_probe_device+0x90/0x98
[ 7.761054] deferred_probe_work_func+0x6c/0xa0
[ 7.761383] process_one_work+0x1e4/0x340
[ 7.761669] worker_thread+0x248/0x488
[ 7.762077] kthread+0x124/0x128
[ 7.762541] ret_from_fork+0x10/0x18
[ 7.763629] dwc3 fe200000.dwc3: can't allocate event buffer
[ 7.764128] dwc3 fe200000.dwc3: failed to allocate event buffers
[ 7.765396] dwc3: probe of fe200000.dwc3 failed with error -12
[ 7.771536] zynqmp_gpd_attach_dev() domain10 request failed for node 23: -13
[ 7.772502] dwc3-of-simple ff9e0000.usb1: failed to add to PM domain domain10: -13
[ 7.773189] dwc3-of-simple: probe of ff9e0000.usb1 failed with error -13
[ 7.816993] pca954x 0-0075: probe failed
[ 7.818683] i2c i2c-0: Failed to register i2c client pca9548 at 0x75 (-16)
[ 7.819242] i2c i2c-0: of_i2c: Failure registering /amba/i2c@ff030000/i2cswitch@75
[ 7.819833] i2c i2c-0: Failed to create I2C device for /amba/i2c@ff030000/i2cswitch@75
[ 7.820588] cdns-i2c ff030000.i2c: 100 kHz mmio ff030000 irq 31
[ 7.835336] cdns-wdt fd4d0000.watchdog: Xilinx Watchdog Timer with timeout 60s
[ 7.840589] cdns-wdt ff150000.watchdog: Xilinx Watchdog Timer with timeout 10s
[ 7.851437] pwrseq_simple sdio_pwrseq: mmc succesfully got gpio_resetn
[ 7.854250] pwrseq_simple sdio_pwrseq: mmc succesfully got gpio_chip_en
[ 7.869974] zynqmp_gpd_attach_dev() domain12 request failed for node 39: -13
[ 7.871047] sdhci-arasan ff160000.mmc: failed to add to PM domain domain12: -13
[ 7.871819] sdhci-arasan: probe of ff160000.mmc failed with error -13
[ 7.885536] sdhci-arasan ff170000.mmc: allocated mmc-pwrseq
[ 7.890156] sdhci-arasan ff170000.mmc: Linked as a consumer to regulator.1
[ 7.938481] mmc0: SDHCI controller on ff170000.mmc [ff170000.mmc] using ADMA 64-bit
[ 7.968830] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
[ 7.980722] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
[ 8.015071] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 8.029080] rtc_zynqmp ffa60000.rtc: setting system clock to 2020-01-20 11:49:06 UTC (1579520946)
[ 8.030704] of_cfs_init
[ 8.031683] of_cfs_init: OK
[ 8.033293] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 8.046621] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
[ 8.066934] mmc0: Problem switching card into high-speed mode!
[ 8.069720] mmc0: new SDHC card at address 4567
[ 8.080098] mmcblk0: mmc0:4567 QEMU! 19.5 GiB
[ 8.109282] mmcblk0: p1 p2
[ 8.119426] xilinx-dp-snd-card fd4a0000.zynqmp-display:zynqmp_dp_snd_card: ASoC: CPU DAI (null) not registered
[ 8.348452] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 8.349371] clk: Not disabling unused clocks
[ 8.350441] ALSA device list:
[ 8.350714] No soundcards found.
[ 8.360015] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 8.364243] cfg80211: failed to load regulatory.db
[ 8.548872] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[ 8.558980] EXT4-fs (mmcblk0p2): recovery complete
[ 8.563100] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.564879] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 8.587379] devtmpfs: mounted
[ 8.691692] Freeing unused kernel memory: 832K
[ 8.735400] Run /sbin/init as init process
INIT: version 2.88 booting
[ 9.823427] random: fast init done
Starting udev
[ 12.245782] udevd[1836]: starting version 3.2.5
[ 12.314587] random: udevd: uninitialized urandom read (16 bytes read)
[ 12.321691] random: udevd: uninitialized urandom read (16 bytes read)
[ 12.326981] random: udevd: uninitialized urandom read (16 bytes read)
[ 12.687952] udevd[1837]: starting eudev-3.2.5
[ 13.708127] urandom_read: 5 callbacks suppressed
[ 13.708544] random: udevd: uninitialized urandom read (16 bytes read)
[ 14.879647] random: udevd: uninitialized urandom read (16 bytes read)
[ 27.124257] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 27.724386] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Starting Ultra96 AP setup daemon.
Turning Ultra96 WiFi & Bluetooth LEDs ON...done.
Starting Flask server deamon to serve Ultra96 startup page.
INIT: Entering runlevel: 5
Configuring network interfaces... Successfully initialized wpa_supplicant
rfkill: Cannot get wiphy information
Could not read interface wlan0 flags: No such device
WEXT: Could not set interface 'wlan0' UP
wlan0: Failed to initialize driver interface
Cannot find device "wlan0"
[ 41.309387] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.412203] macb ff0e0000.ethernet eth0: link up (100/Full)
[ 42.413720] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Starting system message bus: dbus.
Starting Connection Manager
Starting haveged: haveged: listening socket at 3
haveged: haveged starting up
attempting to run /mnt/init.sh
/mnt
cp: cannot stat '/mnt/platform_desc.txt': No such file or directory
Starting Xserver
mount: /mnt: /dev/mmcblk0p1 already mounted on /run/media/mmcblk0p1.
mount: /mnt: /dev/mmcblk0 already mounted or mount point busy.
attempting to run /mnt/init.sh
/mnt
cp: cannot stat '/mnt/platform_desc.txt': No such file or directory
haveged: haveged: ver: 1.9.4; arch: generic; vend: ; build: (gcc 8.2.0 CTV); collect: 128K
haveged: haveged: cpu: (VC); data: 16K (D V); inst: 16K (D V); idx: 11/40; sz: 15528/64688
haveged: haveged: tot tests(BA8): A:1/1 B:1/1 continuous tests(B): last entropy estimate 7.99692
haveged: haveged: fills: 0, generated: 0
Starting Dropbear SSH server: [ 48.229711] random: crng init done
mount: /mnt: /dev/mmcblk0p1 already mounted on /run/media/mmcblk0p1.
dropbear.
mount: /mnt: /dev/mmcblk0 already mounted or mount point busy.
attempting to run /mnt/init.sh
Starting rpcbind daemon.../mnt
cp: cannot stat '/mnt/platform_desc.txt': No such file or directory
done.
X.Org X Server 1.20.1
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.10.0-327.el7.x86_64 x86_64
Current Operating System: Linux ultra96v2-oob-2019_2 4.19.0-xilinx-v2019.2 #1 SMP Mon Jan 20 09:32:29 UTC 2020 aarch64
Kernel command line: earlycon console=ttyPS0,115200 clk_ignore_unused root=/dev/mmcblk0p2 rw rootwait
Build Date: 24 October 2019 07:22:49AM
Current version of pixman: 0.34.0
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 20 11:49:48 2020
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
starting statd: done
Starting bluetooth: bluetoothd.
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Unsupported high keycode 372 for name ignored
> X11 cannot support keycodes above 255.
> This warning only shows for the first high keycode.
Errors from xkbcomp are not fatal to the X server
Starting Distributed Compiler Daemon: distcc/etc/rc5.d/S20distcc: start failed with error code 110
Starting internet superserver: inetd.
exportfs: can't open /etc/exports for reading
NFS daemon support not enabled in kernel
Starting ntpd: done
Starting syslogd/klogd: done
D-BUS per-session daemon address is: unix:abstract=/tmp/dbus-xjer3cfTNI,guid=c2f32701c1bab7b4db0c45ac5e2593e3
Starting internet superserver: xinetd.
mount: /mnt: /dev/mmcblk0p1 already mounted on /run/media/mmcblk0p1.
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
mount: /mnt: /dev/mmcblk0 already mounted or mount point busy.
attempting to run /mnt/init.sh
/mnt
cp: cannot stat '/mnt/platform_desc.txt': No such file or directory
Starting Telephony daemon
Starting watchdog daemon...done
Opening webpage
GLib-GIO-Message: 11:50:01.545: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications.
Starting Linux NFC daemon
Failed to launch bus: Failed to execute child process ?/usr/bin? (Permission denied)Connection failure: Connection refused
pa_context_connect() failed: Connection refused
Starting network management services:matchbox: Cant find a keycode for keysym 269025056
matchbox: ignoring key shortcut XF86Calendar=!$contacts
matchbox: Cant find a keycode for keysym 2809
matchbox: ignoring key shortcut telephone=!$dates
matchbox: Cant find a keycode for keysym 269025050
matchbox: ignoring key shortcut XF86Start=!matchbox-remote -desktop
[settings daemon] Forking. run with -n to prevent fork
snmpd.
[2422:2422:0120/115009:FATAL:setuid_sandbox_host.cc(157)] The SUID sandbox helper binary was found, but is not configured correctly. Rather than run without sandboxing I'm aborting now. You need to make sure that /usr/lib/chromium/chrome-sandbox is owned by root and has mode 4755.
#0 0x0055646d32b8
#1 0x0055646e870c
#2 0x005567681fec
#3 0x00556741c428
#4 0x00556741b4bc
#5 0x00556741b964
#6 0x0055674ae388
#7 0x005567289e2c
#8 0x00556728980c
#9 0x0055646a7d68
#10 0x0055646a63a0
#11 0x00556429b470
#12 0x007f979c4ce4 __libc_start_main
#13 0x00556429b368
/sbin/launch-ultra96-startup-page.sh: line 9: 2422 Aborted chromium --use-egl --user-data-dir "http://localhost:80"
Starting tcf-agent:
(matchbox-panel:2461): dbind-WARNING **: 11:50:10.489: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)
(matchbox-desktop:2460): dbind-WARNING **: 11:50:10.488: Error retrieving accessibility bus address: org.a11y.Bus.Error: Failed to execute child process ?/usr/bin? (Permission denied)
OK
PetaLinux 2019.2 ultra96v2-oob-2019_2 /dev/ttyPS0
ultra96v2-oob-2019_2 login: root
mount: /mnt: /dev/mmcblk0p1 already mounted on /run/media/mmcblk0p1.
mount: /mnt: /dev/mmcblk0 already mounted or mount point busy.
attempting to run /mnt/init.sh
/mnt
cp: cannot stat '/mnt/platform_desc.txt': No such file or directory
root@ultra96v2-oob-2019_2:/mnt# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0A:35:00:22:01
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::20a:35ff:fe00:2201/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:220 errors:0 dropped:0 overruns:0 frame:0
TX packets:263 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:17726 (17.3 KiB) TX bytes:26168 (25.5 KiB)
Interrupt:29
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:402 errors:0 dropped:0 overruns:0 frame:0
TX packets:402 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:30924 (30.1 KiB) TX bytes:30924 (30.1 KiB)
root@ultra96v2-oob-2019_2:/mnt#
0 件のコメント:
コメントを投稿